SLICK 50® SUPERCHARGED ENGINE TREATMENT - PUT TO THE TEST
Adding one bottle of Slick 50 Supercharged Synthetic Engine Treatment (15 oz.) produced a dyno run that yielded an increase of 10 horsepower.
2012 Subaru Outback
Adding one bottle of Slick 50 Supercharged Synthetic Engine Treatment (15 oz.) produced a dyno run that yielded an increase of 10 horsepower.
THE CHASSIS DYNO TESTING
We utilized an all-wheel-drive chassis dynamometer. A simple testing machine that provides a controlled environment to generate an apples-to-apples comparison of driving with and without Slick 50 product in as close to identical conditions as you can get. This is the same tool used by race teams to determine how much horsepower their race cars are producing before they go to the track.
The subject was a 2012 Subaru Outback that had run *Mobil 1™ 5W-30 synthetic oil exclusively from the time it was purchased new. It was a 6 cylinder with 14,000 miles and four oil changes since purchase. A new engine that had only run synthetic oil was the perfect place to really see what Slick 50 Supercharged can do.
THE CONDITIONS
Testing was completed during the mid-morning hours. Weather conditions were overcast with temperatures in the mid-70s. To keep atmospheric conditions as close as possible for both runs, the baseline (non-Slick 50) runs were taken within an hour of the Slick 50 runs. After the baseline run, we added Slick 50 Supercharged and drove the car on the dyno for 10 minutes at 55-70 mph to allow the Slick 50 to blend with the existing oil.
THE RESULTS
The baseline runs yielded 206 horsepower as measured at the wheels, on the top end. Factory specs list the 2012 Outback 6 cylinder as measuring 256 horsepower at the crank (engine.) This equates to a 20-25% loss in power through the drive-line, which is right at the accepted calculation percentage for all-wheel drive loss.
Adding one bottle of Slick 50 Supercharged Synthetic Engine Treatment (15 oz.) produced a run that yielded 214 horsepower, an increase of 10 horsepower to the engine. Using the accepted loss calculation we can assume that, at the wheel, that is a gain of 8 horsepower.
*Mobil 1™ is a trademark of Exxon Mobil Corporation
2013 Ford Mustang
Adding one bottle of Slick 50 Supercharged Synthetic Engine Treatment (15 oz.) produced a dyno run that yielded an increase of 10 horsepower.
THE CHASSIS DYNO TESTING
Our second subject was a 2013 Ford Mustang. This rear-wheel-drive, V6 coupe had just over 11,000 miles on the odometer. The horsepower rating at the crank for this car was 305, and as most cars are these days, the engine is mated to an automatic transmission.
We again utilized an all-wheel-drive chassis dynamometer. A simple testing machine that provides a controlled environment to generate an apples-to-apples comparison of driving with and without Slick 50 product in as close to identical conditions as you can get. This is the same tool used by race teams to determine how much horsepower their race cars are producing before they go to the track.
Prior to the testing, the oil was changed using factory-recommended *Motorcraft® 5W-20 Synthetic Blend motor oil.
THE CONDITIONS
Conditions were mild with temperatures in the low-80’s and the dyno test procedure was kept identical to our first test with the Subaru. The baseline and Slick 50 runs were performed within an hour of each other and the car was given a 10 minute, steady, “highway dyno run” once the Slick 50 Supercharged product was introduced, to allow for proper seat-in.
THE RESULTS
The baseline run pulled 228 horsepower at the wheels out of the 3.7 liter Ford Mustang power-plant. With the baseline runs complete, one bottle of Slick 50 Supercharged (15 oz) was added to the engine, seated on the dyno, and followed by a cool-down period.
Then the Mustang was put through the paces again, generating a total of 236 horsepower at the wheels as registered by the dyno. Following the standard drive-train loss formula, we are again looking at a 10 horsepower gain at the engine crank and a bump of 8 horsepower at the wheels just by adding Slick 50 Supercharged Synthetic Engine Treatment.
We’re two for two. Considering the amount of money some people will spend to add 10 horsepower to their engine, Slick 50 appears to be quite a bargain. This is before you introduce the long term benefits of using Slick 50 Supercharged.
*Motorcraft® is a registered trademark of Ford Motor Company
ALL PRODUCTS
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
